Silverhook Clear Polyurethane based Adhesive & Sealant is suitable for use in construction and repair applications where a permanent ultra strong (D4) waterproof bond is required between porous-porous and porous-nonporous surfaces. It can be used for bonding to various kinds of materials such as wood, MDF, concrete, metal, polystyrene, polyurethane foam, PVC, marble, granite, polycarbonate, glass, ceramic and much more.
Directions for use: Ensure area to be treated is clean dry and free from any loose dirt. Unscrew the nozzle from tube, then using a sharp knife cut the tip of the tube. Place the removed nozzle on a flat surface then cut the nozzle at an angle of about 45 degrees. The higher up the nozzle the smaller the aperture you will leave so start small and widen, by cutting further down as required. Screw the nozzle back onto the tube and insert into application gun. Squeeze the trigger gently until you can see the product appearing in the nozzle. Place the nozzle onto the job at the same angle that the nozzle has been cut then lift the handle end slightly to allow the product to be squeezed out. Move the gun at the same time as pulling the trigger keeping the bead of product uniform in thickness.
|Safety Data Sheet||Download|
Big Boy Polyurethane Adhesive and Sealant Cartridge - Clear 310ml
- Product Code: BIGPU01